LG LCN097HV4 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 21

LG LCN097HV4 Скачать руководство пользователя страница 17

Owner's Manual

17

Operating Instructions

E

N

G

L

IS

H

Forced operation is used when the remote controller can't be used. The operation will be started if the ON/OFF
button is pressed. If you want to stop the operation, re-press the button.

Forced Operation

Button

[Ceiling Cassette Type]

Test operation

During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room temperature
and resets in 18 minutes. During test operation, if remote controller signal is received, the unit operates as remote controller
sets. If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds, then the buzzer sound 1
'beep'. If you want to stop the operation, re-press the button.

This feature is enabled by factory default setting, but you can disable it by pressing the ON/OFF button for 6
seconds. The unit will beep twice and the lamp will blink 8 times.
To enable it, press the button again for 6 seconds. The unit will beep twice and the blue lamp will blink 4 times.

NOTE

This function is useful in the situation of power failure.
When power regains after a failure this feature restore the previous operating condition
and the air conditioner will run in the same settings.

Auto Restart Function

Heat pump Model

Room Temp. ≥ 24°C(75.2°F)

21°C(69.8°F) ≤ Room Temp. < 24°C(75.2°F)

Room Temp. < 21°C(69.8°F)

Operating mode

Cooling

Healthy Dehumidification

Heating

Indoor FAN Speed

High

High

High

Setting Temperature

22°C(71.6°F)

23°C(73.4°F)

24°C(75.2°F)

Forced operation

«
...
15
16
17
18
19
...
»

Содержание LCN097HV4






















Отзывы:

Нет отзывов