Front Panel
Rear Panel
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Standby /On
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Selects Function
· · · · · · · · · · · · · · · · · · · · · · · · · ·
Adjusts Volume
PORT. IN
· · · · · · · · · · · · ·
Connect to a Portable device
OPTICAL IN
· · · · · · · · · · ·
Connect to an Optical device
Subwoofer Connection
1
Place the wireless subwoofer near the sound bar and
follow steps below.
a
Connect the power cord of wireless
subwoofer to the outlet.
b
Turn on the sound bar :
The sound bar and wireless subwoofer will be
automatically
connected. The subwoofer's yel-
low - green LED turns on.
Subwoofer Connection Manually
a
Reset the Subwoofer
If the yellow - green LED on the subwoofer
blinks rapidly, skip this step and go to
b
y
Press and hold
PAIRING
button for 5 seconds.
y
The LED lights up alternately in red and
yellow - green.
y
Unplug the power cord. After the LED turns off
completely, plug in the power cord again.
When the reset is completed, the subwoofer's
yellow - green LED blinks rapidly.
b
Reset the sound bar
y
Adjust volume to minimum until the red LED on
the sound bar lights up for a while.
y
Press and hold (Mute) button on the remote
control for 3 seconds.
y
The red LED on the sound bar blinks rapidly.
y
Turn the sound bar’s power off and on while the
subwoofer’s yellow - green LED blinks.
When the connection is completed, you can see the
yellow - green LED on the subwoofer.
Keep the sound bar and the subwoofer
away from the following (ex. wireless router,
microwave oven, etc.) over 1m (3.3 ft) to
prevent wireless interference.
!P
a
Connect the the sound bar to the TV using Opti-
cal cable.
b
Set up [External Speaker (Optical)] on your TV
setting menu.
TV
TV Connection
2
Remote control
Additional Device Connection
a
Connect to the external device as follows.
TV
(Set-top
Box, Player
etc.)
b
Set the input source by pressing
F
on the
remote control or unit repeatedly.
Additional Information
STANDARD/VOICE/CINEMA
:
Selects sound effect.
DRC ON/OFF
: Makes comfortable sound at Dolby Digital.
WOOFER LEVEL +/-
:
Adjusts the volume level of subwoofer.
AUTO POWER ON/OFF
:
Automatically turns on by an input
source.
Replacement of battery
Specification
Power
requirements
Refer to the main label.
Power
consumption
Refer to the main label.
Dimensions
(W x H x D)
Approx.
950 mm x 71 mm x 47 mm
(37.4 inch x 2.8 inch x 1.9 inch)
Net Weight
Approx. 2.47 kg (5.4 lb)
Amplifier
(Total RMS
Output power)
300 W RMS
Design and specifications are subject to change
without notice.
LAS464B.DUSALLG_SIM_ENG_6807.indd 3-4
2017-06-23 �� 2:40:48
