STANDARD/VOICE/CINEMA
:
Select sound effet.
DRC ON/OFF
:
Make comfortable sound at Dolby Digital.
WOOFER LEVEL +/-
:
Adjusts the volume level of
subwoofer.
AUTO POWER ON/OFF
:
Automatically turns on by an
input source.
Replacement of battery
Specification
Power
requirements
Refer to the main label.
Power
consumption
Refer to the main label.
Networked standby : 0.5 W
(If all network ports are
activated.)
Dimensions
(W x H x D)
Approx.
950 mm x 71 mm x 47 mm
Net Weight
Approx. 2.47 kg
Total amplifier
300 W
Design and specifications are subject to change without
notice.
How to disconnect the wireless network
connection or the wireless device
Set up the AUTO POWER ON/OFF function to off and
turn off the unit.
POWER:
This unit operates on a mains supply of 200-
240V~, 50/60Hz.
Wiring:
This unit is supplied with a BS 1363 approved
main plug. When replacing the fuse, always use of the
same rating approved to BS 1362. Never use this plug
with the fuse cover omitted. To obtain a replacement
fuse cover contact your dealer. If the type of plug
supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable
type fitted. Please refer to the wiring instructions below:
Warning:
A mains plug removed from the mains lead
of this unit must be destroyed. A mains plug with bared
wires is hazardous if inserted in a mains socket. Do not
connect either wire to the earth pin, marked with the
letter E or with the earth symbol or coloured green
or green and yellow. If any other plug is fitted, use same
rating of fuse in the plug.
Important:
The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN:
LIVE - As the colours
of the wires in the mains lead of this unit may not
correspond with the coloured marking identifying the
terminals in your plug, proceed as follows: The wire which
is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black. The
wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured
red.
Remote control
Additional Information
a
Connect the sound bar to the TV using
Optical cable.
b
Set up [External Speaker (Optical)] on
your TV setting menu.
TV Connection
2
TV
Additional Device Connection
a
Connect to the external device as follows.
TV
(Set-top Box,
Player etc.)
b
Set the input source by pressing
F
on the
remote control or unit repeatedly.
Содержание LAS464B
Страница 4: ......
