13
Playing a USB device
1
Connect one end to the USB port on your USB device and then plug the other end into
your unit's USB port.
2
After “USB CHECK” appears, playback starts automatically.
Note
The method of files recorded in a USB memory device is the same as when using a DISC.
Moving to another drive
When connecting this unit to Multi reader, press
DRIVE/BAND
to go to the next drive.
(Press
BAND/DRV
on the remote control.)
Each time you press the button, the driver modes changes.
Notes
• Do not remove an MP3 player or memory card while playing via a USB device.
• The maximum number of available files is 999 EA.
• The maximum number of available folders is 255 EA.
• Be sure to save the file in the memory card after formatting.
• There is no support for hard type external cases.
• This unit supports FAT format (2 Kbyte/sector).
• USB Hub is not supported. When connecting this unit to a USB Hub, “USB CHECKING/USB
ERROR1” will be shown in the display window.
• Some memory sticks or cards may not be recognised depending on the type of memory
card.
• There is no support for a USB device (Card reader, USB memory stick, MP3 player) which
requires installation.
• If the connected device is not supported, "USB ERROR1" or "USB ERROR2" will appear on
the display window.
• Do not guarantee excess of supplying current. (The maximum supplying current is around
500 mA.)
• Do not guarantee USB devices that adopted the OTG technology.
Listening to radio stations
1
Press
SOURCE
to select the tuner.
2
Press the
DRIVE
/
BAND
repeatedly to select a band.
The indicator lights up in the following order. FM1
t
FM2
t
FM3
t
MW(AM)
3
Auto Search :
Press
I
I
/
i
i
(
?m m
/
M M?
on the remote control).
When a station is received, searching stops.
Manual Search :
Press and hold
I
I
/
i
i
(
?m m
/
M M?
on the remote control) until
“MANUAL” appears, and then press it repeatedly.
The frequencies move up or down step by step.
Storing and recalling broadcast frequencies
You can easily store up to 6 broadcast frequencies for later recall at the touch of a button.
1
Press
DRIVE
/
BAND
to select desired band you want to store.
2
Select the desired frequency.
3
Press one of preset buttons 1~6 and hold until the beep sound.
The number you have pressed will appears the preset number on screen and then remain
lit. The selected radio station frequency has been stored in memory.
Radio operation
