Listening to the radio - more you can do
Auto search memory
Push the button up to
U
U
/AS
. The six strongest broadcast frequencies will be
stored under preset button 1-6 in the order of their signal strength.To cancel, push
the button up to
U
U
/AS
.
Storing and recalling broadcast frequencies
1 Press
BAND
to select desired band you want to store.
2 Select the desired frequency and press one of preset buttons 1-6 and hold
until the beep sound.
3 Repeat steps 1-2 to preset other stations.The next time, you press the same
preset button, the radio station frequency is recalled from the memory.
To scan the preset stations
Push the button down to
u
u
/PS
. Each preset station appears. To cancel, push
the button down to
u
u
/PS
.
To tune in the preset stations
Press
BAND
to select the desired band and press the desired preset button 1-6
(preset button 1-6 on the remote control).
Note
•
When a station is stored on the preset numbers on which another station of
the same band has already been preset, the previously preset station is auto-
matically erased.
Listening to the radio
ON PLAYER
ON REMOTE
1. Select a source to tuner.
2. Select a band.
3. Auto seek.
Manual seek.
SRC
BAND
-
?b / B?
+
Press and hold
-
?b / B?
+
SRC
3
3
/ BAND
?mm
/
MM?
Press and hold
?mm
/
MM?
12
CAR CD/MP3/WMA Receiver
Connecting USB device
ON PLAYER
ON REMOTE
1. Open the USB cover.
2. Connect the USB device.
3. Adjust the volume.
-
-
Rotate PWR
-
-
VOLUME
Moving to another drive
When connecting this unit to multi reader, press
BAND
(
BAND/DRV
on remote
control) to go to the next drive. Each time you press the button, the driver
modes changes.
Note
•
If the USB device is already connected, press
SRC
(
SRC
on remote control.)
to select a source to USB.
•
Pause / Intro Scan / Repeat / Shuffle / ... functions are same with “Listening to
a CD - more you can do”. Refer to the page 11.
