16
Troubleshooting
: Symptom
/
: Cause
: Correction
Power doesn’t turn on. / The unit
doesn’t operate.
Leads and connectors are not properly
connected.
Confirm once more that all
connections are correct.
The fuse is blown.
Rectify the problem that caused the
fuse to blow, and then replace it. Be very
sure to install the correct fuse with the same
rate.
Noise and other factors are causing
the built-in microprocessor to operate
incorrectly.
Turn the unit off and then on.
Playback is not possible.
The disc is dirty.
Clean disc.
The loaded disc is of a type this unit
cannot play.
Check what type the disc.
No sound is heard. / The volume
level will not rise.
Cables are not connected correctly.
Connect the cables correctly.
There’s no sound.
The volume level is low.
Adjust the volume.
There’s audio skipping.
This unit is not firmly secured.
Secure this unit firmly.
The unit does not operate correctly
even when the appropriate remote
control buttons are pressed.
Battery power is low.
Load new battery.
Co
Ca
Sy
Co
Ca
Sy
Co
Ca
Sy
Co
Ca
Sy
Co
Ca
Co
Ca
Sy
Co
Ca
Co
Ca
Co
Ca
Sy
Co
Ca
Sy