2-11
1-2. PIN FUNCTION (Note1)
1
GND
Ground
-
-
-
-
2
FREG_B
External Trs bass drive (Note4)
On/Off
On/Off
Off
Off
3
FREG_F
FREG feedback terminal
On/Off
On/Off
Off
Off
4
ILMOUT
8.4V output for JLM/500mAmax
On/Off
Off
Off
Off
5
CTL4
FREG control terminal
-
-
-
-
6
CDOUT
8.0V output for CD/1.3Amax (Note4)
On/Off
Off
Off
Off
7
DSPOUT
3.3V output for DSP/250mAmax (Note4)
On/Off
Off
Off
Off
8
VB
Battery
-
-
-
-
9
CTL3
ILM control terminal
-
-
-
-
10
AUDIOOUT
8.4V output for AUDIO/500mAmax (Note4)
On/Off
Off
Off
Off
11
CTL1
DSP, CD, Audio control terminal
-
-
-
-
12
EXTOUT
High side output/600mAmax (Note4)
On/Off
Off
Off
Off
13
CTL2
EXT control terminal
-
-
-
-
14
VDDOUT
5.7V output for micro controller (Note4)
On
On
On
Off
15
VBUP
Back up
-
-
-
-
Note1. In the uper table. “On” means always On. “Off” means compulsory Off and “On/Off” means that it can control by control
terminal.
Note2. Thermal protection circuit
A built-in thermal protection circuit (TSD:Thermal shut down) prevents thermal damage to the IC. All outputs except
VDD(pin14) and FREG (pin2&3) are switched off when the circuit operates, revert to the original state when the
temperature drops to a certain level.
Note3. Overvoltage protection circuit
The overvoltage protection circuit (surge protector) turns off all outputs without Vdd, when VB voltage is more than
about 21V. And the overvoltage protection circuit (surge protector) turns off Vdd output with other all outputs, when
VB voltage is more than about 26V. When the overvoltage protection operates on VB>=18V condition, the stand by
current increases.
Note 4. Overcurrent protection circuit
FREG_B (pin2), ILMOUT (pin4), CDOUT (pin6), DSPOUT (pin7), AUDIOOUT (pin10), EXITOUT (pin12), VDDOUT
(pin14) output circuits are built-in overcurrent protection circuit based on the respective output current. These
overcurrent protection circuits limit the current with a curve shape of “7” in the voltage-current graph. This prevents IC
destruction due to overcurrent.
Normal
operation
Protection function
Pin No.
Pin name
Function
(Note2)
(Note3) (Note3)
TSD On
VB=24V
VB=50V
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only