12
AUX operation
Playing an Auxiliary Equipment
You can connect Auxiliary Equipment to this unit.
Connect one to the external device jack using the line input cable (not supplied), and the
other to the AUX input jack on the control panel.
Auxiliary input
MP3 Player, etc
Line input cable
1
Press
SOURCE
to select the AUX as source.
AUX IN appears in the display.
2
Turn on the connected Auxiliary Equipment and start playing the source.
3
Adjust the volume.
Note
•
Before operating the Auxiliary Equipment using the following procedure, select the external
input correctly. (Refer to the page 10 for details.)
•
If the input level of the Auxiliary Equipment connected to the AUX input jack is not high
enough, adjust the input level properly. (Refer to the page 10 for details.)
Radio operation
Listening to radio stations
1
Press
SOURCE
to select the tuner.
2
Press the
BAND
repeatedly to select a band.
The indicator lights up in the following order. FM1
t
FM2
t
FM3
t
MW(AM)
3
Auto Seek :
Press
I
I
/
i
i
(
?m m
/
M M?
on the remote control).
When a station is received, searching stops.
Manual Seek :
Press and hold
I
I
/
i
i
(
?m m
/
M M?
on the remote control) until “MANU-
AL” appears, and then press it repeatedly.
The frequencies move up or down step by step.
Storing and recalling broadcast frequencies
You can easily store up to 6 broadcast frequencies for later recall at the touch of a button.
1
Press
BAND
to select desired band you want to store.
2
Select the desired frequency.
3
Press one of preset buttons 1-6 and hold until the beep sound.
The number you have pressed will flash in the preset number indicator and then remain
lit. The selected radio station frequency has been stored in memory.
4
Repeat steps 1-3 to preset other stations.
The next time, you press the same preset button, the radio station frequency is
recalled from the memory.
