LG LAC-M5600, Руководство по обслуживанию

Страница: 8 / 43

- 1-7 -
❏
INSTALLATION
5
4
3
1
2
6
Front panel
Before installing, make sure that the ignition switch is set to
OFF and remove the terminal of the car battery to avoid
short-circuiting.
1 Remove the existing receiver unit.
2 Make the necessary connections.
3 Install the installation sleeve.
4 Install the unit into the installation sleeve.
Removing the existing receiver unit.
Please remove any installation sleeves already in place for the
receiver unit in the dashboard, it must be removed.
1 Remove the rear support from the unit.
2 Remove the front panel and trim ring from the unit.
3 Insert the lever into the hole on one side of the unit.
Perform the same operation on the other side and pull the
unit out from the mounting sleeve.
Basic Installation
1 Slide the unit into the ISO-DIN frame.
2 Install the screws removed from the old unit.
3 Slide the unit and frame into the dash opening.
4 Install the dash panel or adapter plate.
5 Install the trim ring into unit.
6 Install the faceplate by fitting the right edge into position
then pushing the left edge closed.
ISO-DIN Installation
Bend the claws
according to
the thickness
of the
dashboard
Front panel
A
A
•
•
A