13
Basic Operation
OPERA
TION
SOUND Adjustment
Using the EQ (Equalizer)
The equalizer lets you adjust the equalization to match car interior
acoustic characteristics as desired.
There are 3 stored equalizer curves which you can easily recall at
any time.
Here is a list of the equalizer curves:
• EQ POP : Reproduces the acoustics of pop music.
• EQ CLASSIC : Reproduces the acoustics of orchestral music.
• EQ ROCK : Reproduces the acoustics of rock music.
1. Press
EQ/XDSS
on the front panel to select the equalizer.
2. Press
EQ/XDSS
repeatedly to select among the following
equalizer.
POP
→
CLASSIC
→
ROCK
→
FLAT (NO display)
→
POP....
MUTE
1. Press
PWR/MUTE
[
POWER/MUTE (
)]
to cut the sound.
2. To cancel it press
PWR/MUTE
[
POWER/MUTE (
)]
again.
SELECTION (SEL) Button
1. Press the
SELECTION (SEL.)
repeatedly to select the mode
you want to adjust from volume, bass, treble, balance and
fader. The mode indicator lights up in the following order.
2. Press CONTROL UP
(VOL.+)
or DOWN
(VOL.-)
( or press
VOLUME (
/
)
on the remote control) to adjust the sound
quality.
NOTE
The unit cannot adjust the bass and treble in the
EQ
on mode.
XDSS (Extreme Dynamic Sound System)
Press and hold
EQ/XDSS
button to reinforce treble, bass and sur-
round effect.
Turn right
Turn left
VOL
Increase the volume
level.
Decrease the volume
level.
BAS
Increase the bass
level.
Decrease the bass
level.
TRB
Increase the Treble
level.
Decrease the Treble
level.
BAL
Decrease the level of
the left speaker(s).
Decrease the level of
the right speaker(s).
FAD
Decrease the level of
the front speaker(s).
Decrease the level of
the rear speaker(s).
VOL
BAS
TRB
BAL
FAD
