Radio Operation
14
Listening to radio stations
1. Press the
POWER/MUTE (
)
[
POWER
on the front panel] but-
ton to turn the unit on.
- When you select a source the unit is turned on.
2. Press the
FUNC.
or
BAND
button to select the tuner.
3. Press the
BAND
button to select a band.
- Press the
BAND
button until the desired band is displayed,
FM1,FM2, FM3, MW(AM).
4. To perform seek tuning, pressing the
TUNE(
-/+)
or
.
. m
m
/
M
M >
>
for more 1 second.
- The tuner will scan the frequencies until a broadcast with
strong enough reception is found.
- You can cancel seek tuning by pressing the
TUNE(
-/+)
or
.
. m
m
/
M
M >
>
with quick presses.
5. To perform manual tuning, press the
TUNE(
-/+)
button with
quick presses.
- The frequencies move up or down step by step.
NOTE
• When the selected frequency is being broadcast in stereo, the “
”
indicator will light.
Auto Search Memory
This function lets you automatically store the six strongest
broadcast frequencies.
1.
•
Press the
BAND
button to select the tuner.
•
Press the
FUNC.
button to select the tuner.
2. Press the
AS/PS
button on the front panel for about 1 second.
- Scanning starts from the currently displayed frequency to
higher frequencies and stops when 6 stations have been
preset or the receivable frequencies have been scanned once.
NOTES
• The presetting is not performed if there is no station to be tuned in.
• When automatic presetting is performed, the previous
preset stations are automatically erased.
• To stop the automatic presetting, press the
BAND
or the
AS/PS
button.
Storing and recalling broadcast frequencies
You can easily store up to six broadcast frequencies for later recall
with the touch of a button.
1. Select the desired frequency
2. Press one of the
preset station
buttons (1 - 6) for more than 1
seconds. The number of the pressed preset station button is
displayed.
3. Repeat steps 1 and 2 to preset other stations.
NOTES
•
As F1, F2, F3 have the same frequency range, up to 18 station can be
preset for FM.
• When a station is preset on the preset station button on which another
station of the same band has already been preset, the previously preset
station is automatically erased.
To scan the preset stations
Press the
AS/PS
button on the front panel.
To stop the scanning, press the
AS/PS
button.
To tune in the preset stations
Press BAND to select the desired band and press the desired
number buttons (1-6) on the remote control.
The number of the preset station button is displayed and the
preset station is received.
Содержание LAB-M7500
Страница 20: ...P NO 3834RR0033G ...
