LG L18 Скачать руководство пользователя страница 10

Страница: 10 / 62

ENGLISH

[PM Mode]

•

[Power Off](Default): Sets the normal DC off mode.

•

[Sustain Aspect Ratio]: Identical to normal DC off mode except that the Switching IC remains on. On certain models,

this applies only to a specific input mode (DisplayPort) and has the same effect as [Screen Off Always] in other input

modes.

•

[Screen Off]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), or Abnormal

Shut Down mode.

•

[Screen Off Always]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), Off

Time Scheduling, or Abnormal Shut Down mode, or when there is input from the remote control's Power button or

the monitor's Off button.

NOTE

•

In order for the screen to switch from [Screen Off] to On status, there must be input from the remote control's

Power or Input button, or the monitor's On button.

[Power On Delay](0-250)

•

This feature prevents overload by implementing a power-on delay when multiple monitor sets turn on.

•

You can set the delay interval in the range of 0 to 250 seconds.

[Power On Status]

•

Select the operating status of the monitor when the main power has turned on.

•

You can choose from among PWR (Power On), STD (Standby), and LST (Last Status).

•

PWR (Power On) keeps the monitor powered on when the main power has turned on.

•

STD (Standby) switches the monitor to Standby status when the main power has turned on.

•

LST (Last Status) switches the monitor back to its previous status.

[Wake On LAN]

•

Set whether to use [Wake On LAN].

•

You can set the feature to On or Off for wired network.

•

Wired Network: When set to [On], the Wake On LAN feature is enabled, letting you turn the product on remotely

through a wired network.

[Power On/Off History]

Display the device's power on/off history.

Содержание L18































































Результаты поиска

Содержание L18

Отзывы:

Похожие инструкции для L18

Бренды по названию

Популярные бренды

LG L18, Руководство пользователя

Результаты поиска

Содержание L18

Отзывы:

Похожие инструкции для L18

Бренды по названию

Популярные бренды