15
Installation and Setup
AUDIO
Each DVD disc has a variety of audio output options.
Set the receiver’s AUDIO options according to the
type of audio system you use.
Dynamic Range Control (DRC)
With the DVD*
1
format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
*1: Dolby Digital only
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
HD AV Sync
When using Digital TV. Sometimes AV signal could not
be transmitted simultaneously because of later
transmission of video signal compared to audio signal.
Because it takes some time to convert analog video
signal to digital one in the Digital TV.
And It means that you may not enjoy picture on the
screen and sound from speaker at the same time
even though it is one scene.
In the HD AV Sync menu, you could adjust delay time
to audio signal for simultaneous AV signal
transmission.
Delay time could be set up with 10msec unit.
(0 ~ 300msec)
Delay time is different with each TV Brand. So you
need to adjust optimal delay time complying with
your TV.
5.1 Speaker Setup
Make the following settings for the built-in 5.1 channel
surround decoder.
1. Press ENTER and 5.1 Speaker Setup menu
appears.
2. Use
b
/
B
to select the desired speaker.
3. Adjust options using
v
/
V
/
b
/
B
buttons.
4. Press ENTER to confirm your selection. Returns to
the previous menu.
Speaker selection
Select a speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
Note:
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Size
Since the speaker settings are fixed, you cannot
change the settings.
Volume
Press
b
/
B
to adjust the output level of the selected
speaker. (-5dB ~ 5dB)
Distance
If you connected speakers to your DVD/CD Receiver,
setting the Distance lets the speakers know how far
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the same time.
Press
b
/
B
to adjust the Distance of the selected
speaker. (You can’t adjust front / Woofer speakers)
Test
Press
b
/
B
to test the signals of each speaker. Adjust
the volume to match the volume of test signals
memorized in the system.
Front Left (L)
→
Center
→
Front Right (R)
→
Rear Right (R)
→
Rear Left (L)
→
SubWoofer
Select
5.1 Speaker Setup
On
DRC
On
Vocal
Move
Select
AUDIO
000 ms
HD AV Sync
AUDIO
Speaker
Volume
Distance
Test
Move
Return
Select
Size
Front L
Small
0
dB
m
0
Off
Enter
