LGE Internal Use Only
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 95 -
10. ENGINEERING MODE
10.1.6 BATTERY
1) Bat Cal : This displays the value of Battery Calibration. The following menus are displayed in order :
BAT_LEV_4V, BAT_LEV_3_LIMIT, BAT_LEV_2_LIMIT, BAT_LEV_1_LIMIT, BAT_IDLE_LI MIT,
BAT_INCALL_LIMIT, SHUT_DOWN_VOLTAGE, BAT_RECHARGE_LMT
2) TEMP Cal : This displays the value of Temperature Calibration. The following menus are displayed
in order : TEMP_HIGH_LIMIT, TEMP_HIGH_RECHARGE_LMT, TEMP_LOW_RECHARGE_LMT,
TEMP_LOW_LIMIT
10.1.7 Audio
This is NOT a necessary menu to be used by neither engineers nor users.
10.1.8 DAI (Digital Audio Interface)
This menu is to set the Digital Audio Interface Mode for Speech Transcoder and Acoustic testing.
1) DAI AUDIO : DAI audio mode
2) DAI UPLINK : Speech encoder test
3) DAI DOWNLINK : Speech decoder test
4) DAI OFF : DAI mode off
10.2 RF Test [MENU 2]
10.2.1 SAR test
This menu is to test the Specific Absorption Rate.
1) SAR test on : Phone continuously process TX only. Call-setup equipment is not required.
2) SAR test off : TX process off
10.2.2 Change frequency band
This menu is to change frequency band.
1) GSM ONLY
2) DCS ONLY
3) PCS ONLY
4) 850 ONLY
5) DEFAULT
Содержание KP110
Страница 105: ...LGE Internal Use Only Copyright 2008 LG Electronics Inc All right reserved Only for training and service purposes 106 ...
Страница 121: ...Note ...
Страница 122: ...Note ...