17
Installation
Ins
talla
tion
3
HDMI Out Connection
If you have a HDMI TV or monitor, you can
connect it to this unit using a HDMI cable.
Connect the HDMI OUT jack on the unit to
the HDMI IN jack on a HDMI compatible TV or
monitor.
Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
HDMI Connection
Unit
TV
TIP
• You can fully enjoy digital audio and video
signals together with this HDMI connection.
• When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 19.)
NOTE
• If a connected HDMI device does not accept
the audio output of the unit, the HDMI device
’s audio sound may be distorted or may not
output.
• When you connect a HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and this
unit. Next, switch on the HDMI/DVI device and
leave it for around 30 seconds, then switch on
this unit.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with 720
x 480i (or 576i), 720 x 480p (or 576p), 1 280 x
720p, 1 920 x 1 080i or 1 920 x 1 080p video
input.
• Not all HDCP-compatible HDMI or DVI devices
will work with this unit.
- The picture will not be displayed properly with
non-HDCP device.
- This unit does not playback and TV screen is
changed to black or green screen or the snow
noise may occur on the screen.
• If there is noise or lines on the screen, please
check the HDMI cable and usea higher version
cable than 1.2A HDMI cable.
CAUTION
• Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off the
unit and then turn it on again.
• When the HDMI connection with HDCP is
not verified, TV screen is changed to black or
green screen or the snow noise may occur on
the screen. In this case, check the the HDMI
connection, or disconnect the HDMI cable.
HT805PH-A0_DARELLK_ENG_6810.indd 17
2010-08-31 �� 7:35:37
