SSttaarrtt
C
Coonnffiigguurraattiioonn
C
Chhoooossiinngg w
weeaarriinngg pprreeffeerreennccee
1. Rotate the earpiece to select your left or right ear.
2. Place the Headset on your ear.
3. Extend the ear ring then slip it over the top of
your ear,and press the speaker gently toward
your ear for a snug fit.
C
Chhaannggee D
Diirreeccttiioonn
On the Left
Rotation
On the Right
C
Chhaarrggiinngg H
HBBM
M--550000
Please ensure that your new HBM-500 is fully charged
before your initial use.
1. Open the charging port cover on the side of the headset.
2. Plug the charger into the charging port outlet.
3. While charging, the red LED indicator is lit and will remain lit,
until the headset is fully charged.
4. The red LED light changes to the green color after full charge.
5. Charge the headset for approximately 3 hours
or until the red LED changes to the green LED
N
NO
OTTEE
LLoow
w bbaatttteerryy w
waarrnniinngg
The Headset needs to be recharged when
- You hear a short beeping sound through the Headset’s
speaker at 15 second intervals.
- You see the red LED light flickers 2 times every 2 seconds.
- You see the low battery warning on the LCD.
Power on
- In order to turn the Headset on, press and hold the Call/Power
button located in front of the product for at least 2 seconds.
* If you want to check the battery state on LCD, please wait for 5
seconds after power on.
Because it may not be collect to the real state.
Power off
- In order to turn the Headset off, press and hold the Call/Power
button located in front of the product for at least 3 seconds.
