LG HBLG8000R, Инструкция по эксплуатации

Страница: 4 / 30

1.5 CONTROL LOCATIONS
• VENTILATION
The ventilation lever must be in the CLOSE position
in order to maintain the best cooling conditions.
When a fresh air is necessary in the room, set the
ventilation lever OPEN position.
The damper is opened and room air is exhausted.
- 4 -
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
CLOSE VENT OPEN
FAN SPEED
• Everytime you push this button it is set as follows.
{High(F3) Low(F1) Med(F2) High(F3)...}.
REMOCON SIGNAL RECEIVER
MODE
• Everytime you push this button, it will toggle
between COOL, FAN and DRY.
POWER
• To turn the air conditioner ON, push the button.
To turn the air conditioner OFF, push the button again.
• This button takes priority over any other buttons.
• When you first turn it on, the air conditioner is on the
High cool mode and the temp. at 72
°
F
TEMPERATURE SETTING
• This button can automatically control the temperature
of the room. The temperature can be set within a range
of 60
°
F to 86
°
F by 1
°
F.
Select the lower number for lower temperature of the room.
ENERGY SAVER
If the switch is set to "On", the fan stops when the
compressor stops cooling.
Approximately every 3 minutes the fan will turn on and
check the room air to determine if cooling is needed.
ON/OFF TIMER
• Everytime you push this button, timer is set as follows.
(1Hour 2Hours 3Hours 4Hours 5Hours 6Hours
7Hours 8Hours 9Hours 10Hours 11Hours 12Hours Cancel)
• The Setting Temperature will be raised by 2
°
F 30min.
later and by 2
°
F after another 30 min.
Power
Temp
Fan Speed
Timer Mode
Energy
Saver
TEMPERATURE SETTING
• This button can automatically control the temperature of the room.
The temperature can be set within a range of 60
°
F to 86
°
F by 1
°
F.
Select the lower number for lower temperature of the room.
FAN SPEED
• Everytime you push this button it is set as follows. {High(F3) Low(F1) Med(F2) High(F3)...}.
POWER
• To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
• This button takes priority over any other buttons.
• When you first turn it on, the air conditioner is on the High cool mode and the temp. at 72
°
F
MODE
• Everytime you push this button, it will toggle between COOL, FAN and DRY.
ENERGY SAVER
• If the switch is set to "On", the fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.
ON/OFF TIMER
- STOPPING OPERATION
• Everytime you push this button, when the air conditioner is operating, timer is set as follows.
(1Hour 2Hours 3Hours 4Hours 5Hours 6Hours 7Hours 8Hours 9Hours
10Hours 11Hours 12Hours Cancel)
• The Setting Temperature will be raised by 2
°
F 30min. later and by 2
°
F after another 30 min.
- STARTING OPERATION
• Everytime you push this button, when the air conditioner is not operating, timer is set as follow.
(1Hour 2Hours 3Hours 4Hours 5Hours 6Hours 7Hours 8Hours 9Hours
10Hours 11Hours 12Hours Cancel)
• DISPLAY
• REMOTE CONTROLLER
Precaution: The Remote Controller will not function properly if strong light strikes the sensor window of the air
conditioner or if there are obstacles between the Remote Controller and the air conditioner.