5
Troubleshooting
Troubleshooting
61
Trouble
shoo
ting
5
Troubleshooting
General
Symptom
Cause & Solution
The Power does not turned on.
y
Plug the power cord into the wall outlet securely.
The unit does not start
playback.
y
Insert a playable disc. (Check the disc type, color system, and regional
code.)
y
Place the disc with the playback side down.
y
Place the disc on the disc tray correctly inside the guide.
y
Clean the disc.
y
Cancel the Rating function or change the rating level.
The angle cannot be changed.
y
Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or
music files.
y
The files are not recorded in a format that the unit can play.
y
The unit does not support the codec of the movie file.
The remote control does not
work properly.
y
The remote control is not pointed at the remote sensor of the unit.
y
The remote control is too far from the unit.
y
There is an obstacle in the path of the remote control and the unit.
y
The batteries in the remote control are exhausted.
The unit is plugged in, but the
power will not turn on or off.
You can reset the unit as follows.
1. Press and hold the POWER button for at least five seconds. This will
force the unit to power off then turn the unit back on.
2. Unplug the power cord, wait at least five seconds, and then plug it in
again.
The unit is not operating
normally.