13
5.3 Regulation for ULPG
Check that the connection has been made as described in the “Gas
connection” section.
Undo the screw “
D
” and push the air regulator “
C
” fully down. Use a
spanner to remove the nozzles “
B
” and fit those of suitable type
following the instructions given in the tables for
ULPG
- 2.75 kPa.
The nozzle must not be tightened to a torque of over 3 Nm.
Regulate the air flow by moving the Venturi pipe “
C
”, until the gap
“
A
” is as shown in the table in point “5.5 Regulation of primary air”
and fix it with the screw “
D
”. After making the adjustments, restore
the seals with sealing wax or an equivalent material.
ULPG –
2.75 kPa
Nominal gas
Consumption
(MJ/h)
Injector
(mm)
Burner
Auxiliary
Semi-rapid
Rapid
Rapid large
Fish pan
Wok
4.8
5.9
8.6
9.5
9.5
13.2
0.60
0.65
0.77
0.85
0.85
0.98
