manualshive.com logo in svg

LG HB6422BRU, Инструкция по установке и эксплуатации

Поделиться
Скачать
LG HB6422BRU Скачать руководство пользователя страница 2

Contents

2

Introduction  ................................................................................. 3

1. Instructions for safe and proper use  ...................................... 3

Instructions for the installer  ...................................................... 5

2. Positioning of the hob  ............................................................ 5

3. Electrical connection  .............................................................. 7

4. Gas connection  ...................................................................... 8 

5. Adaptation to different types of gas  ...................................... 10

6. Final operations  ................................................................... 13

Instructions for the user  .......................................................... 15

7. Using the hob  ....................................................................... 15

8. Cleaning and maintenance  .................................................. 17

These instructions are valid only for end user countries whose 

identification symbols appear on the cover of this manual.

INSTRUCTIONS FOR THE INSTALLER: these are for the 

authorised person 

who must carry out a suitable check of the gas 

system, install the appliance, set it functioning and carry out an 

inspection test.

INSTRUCTIONS FOR THE USER: these contain user advice, 

description of the commands and the correct procedures for 

cleaning and maintenance of the appliance.

Содержание HB6422BRU





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды