- 63 -
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
4. RF Circuit Technical Brief
GW520 service manual
RX Front-End
An external low noise amplifier as well as duplex and interstage filters are needed to form a complete
receive chain for each band.
Baseband Processing (analog)
The amplified RF signal is converted by a quadrature demodulator to I and Q signals at baseband
frequency. The resulting inphase and quadrature signals are fed into the analog baseband low pass
filter (Chebyshev type). An optional, additional filter stage can be activated in order to provide the
required selectivity for narrowband blockers. The filter corner frequency is controlled by an on-chip
filter alignment circuit. This filter also provides the overall baseband PGC functionality. The differential
offset voltage after the demodulator is reduced by an on-chip DC compensation loop. The subsequent
last PGC amplifier stage provides 1 dB gain steps. All gains are selected by 3-wire bus program-ming.
4.3.2 Transmitter
The direct-up conversion transmitter for each band consists of:
•fully differential signal path
•configurable input stages (programmable AC and DC input voltages)
•analog channel filter including auto calibration circuit (w/o external components)
•automatic carrier adjustment also featuring compensation of residual I/Q DC offsets
•I/Q modulator including LO buffer and I/Q divider
•LO including on-chip VCO and synthesizer
•RF voltage-controlled gain amplifier (VGA)
For each band, the modulator performs a direct quadrature modulation of the baseband input signals
at I and Q. The internally divided RF VCO signal is split into two orthogonal carriers. The gain of the
VGA is controlled by the voltage at the control pin TXGC. The robustness against PCB and baseband
processor spurious as well as noise is improved by an integrated baseband filter (Butterworth type).
The RF output signal is available at the differential outputs TXOUTH,/TXOUTHX, TXOUTM/TXOUTMX,
and TXOUTL/TXOUTLX. The modulator supply voltage must also be applied to these open drain
differential outputs.
Содержание GW520
Страница 1: ...Service Manual Model GW520 Internal Use Only Service Manual GW520 Date July 2009 Issue 1 1 ...
Страница 155: ... 156 LGE Internal Use Only Copyright 2009 LG Electronics Inc All right reserved Only for training and service purposes ...
Страница 159: ... 160 LGE Internal Use Only Copyright 2009 LG Electronics Inc All right reserved Only for training and service purposes ...
Страница 171: ... 172 LGE Internal Use Only Copyright 2009 LG Electronics Inc All right reserved Only for training and service purposes ...