29
OPERATION
ENGLISH
3
Hold the ice bin with both hands and pull it out
while lifting it upward.
4
Mount them in the reverse order of the
removal process.
CAUTION
• Do not touch the automatic icemaker’s
mechanical parts with your hand or a tool.
Otherwise, appliance damage or injury may
occur.
• Do not disassemble, repair or alter the
automatic icemaker. These tasks should only be
done by a service technician.
• Caution should be taken, as the automatic
icemaker operates continuously after the freezer
door is opened when the automatic icemaker
switch is set to the on position.
• Keep children away from the dispenser.
• When refitting the ice bin, ensure that it is placed
correctly. If it is tilted or unlevel, it may not
continue to make ice due to sensor disruption.
Turning the Icemaker On/Off
To turn the automatic icemaker On/Off, press the
power switch on the icemaker to the ON ( | ) or OFF
(O) position.
Normal Sounds You May Hear
The icemaker water valve will buzz as the icemaker
fills with water. If the power switch is in the ON (|)
position, it will buzz even if it has not yet been
hooked up to water. To stop the buzzing, move the
power switch to OFF (O).
NOTE
• Do not keep the power turned on to the
icemaker if the water line is not connected.
Doing so can damage the icemaker.
Preparing for Vacation
If the ambient temperature will drop below
freezing, have a qualified technician drain the
water supply system to prevent serious property
damage due to flooding caused by ruptured water
lines or connections. Set the icemaker power
switch to OFF (O) and shut off the water supply to
the appliance.
NOTE
• The ice bin should be emptied any time the
icemaker on/off switch is turned to the OFF (O)
position.
InstaView
This feature is only available on some models.
Using the InstaView Door in
Door
The InstaView function on the Door in Door lets you
see if you’re running low on frequently used items
like beverages and snacks, without opening the
refrigerator door.
global_main.book.book Page 29 Tuesday, January 19, 2021 6:41 PM