32
32
Care and maintenance
How to dismantle parts
Care
(
(
(
(
R
(
Separate the lamp by pulling it out
③
while
slightly pressing
①
and rotating
②
the lamp cover.
Turn the bulb counterclockwise. Use a 40-watt
bulb(max.) which can be purchased at a service
centre.
To remove the lamp cover, press the protrusion under the lamp cover to the
front and then pull the lamp cover out.
Turn the bulb counterclockwise. Max. 40 W bulb or LED for refrigerator is
used and can be purchased at a service centre.
Refrigerator
compartment
lamp
Freezer
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
Ice storage bin
(Applicable to
some models only)
After dispenser is
used
(Applicable to
some models only)
NOTE
t%JTNB
ntle by rev
FSTJOHUIFBTTFNCMZJOTUSV
ction
T
. B
FTV
re t
PVOQMVHUIFQ
ower
QMVHCF
for
FEJTNB
n
UMJOHBOEBTTFNCM
y. Nev
FSBQQMZTF
vere force t
PEJTNB
ntle
QB
rt
T
. Par
UTN
a
ZCFEBNBHF
d.
NOTE
t/PUBMMCVMCTXJMMöU
y
PVS
refr
JHF
rator.
B
FTV
re to r
FQMB
c
FUIFCVMCXJMMPOFPGUIFTBNFTJ
ze
TIBQFBOE
wa
UUBH
e.
t
T
IFEJTQFOTFSMJHIUTB
r
F-&%TUI
a
UDBOOPUCFDIBOHF
d.
To remove a shelf, push the shelf to the left
②
,lift the left part of the shelf a bit
①
, lift the right
part up
③
, and take it out.
Lift the door rack holding both sides
①
and pull
it out
②
.
Hold the ice storage bin as shown in the right
figure and pull it out
②
while slightly lifting it
①
.
J "%$!&
is necessary.
K!%% "#%!#
dropping it.
The water collector has no self-draining
function. It should be cleaned regularly.
OPTION 1
First take out the water collector cover.
Press the cover where PUSH marked
①
to
lift the water collector cover up.
Take out the water collector cover as
illustrated
②
.
OPTION 2
Remove the cover by pulling the front side
of water collector cover and dry it with a
cloth.
Pull the cover fully to the front
①
and pull
it out.
②
Clean the base and cover with a
dry cloth.
ENGLISH