ENGLISH
NOTE
• If a tube end is deformed or abraded, trim the end with sharp knife until perfectly round.
Door replacement
3) Remove the freezer compartment door
by lifting it upward. The door should be
lifted high enough for the feed water
pipe tube to be completely pulled out.
1) Loosen the hinge cover screws and
remove the cover. Remove
connection wires, if any, except for
the earth line.
2) Remove keeper by rotating it
clockwise ( ) and then remove the
upper hinge by lifting it up ( ).
3) Remove the refrigerator
compartment door by lifting it up.
Pass the refrigerator laterally through
the access door as illustrated to
the right.
Once the fridge is through the access door, remount the fridge doors by following
the door removal instructions in reverse.
Remove the
refrigerator
compartment
door
Pass the
refrigerator
Lower cover
Enough for
water feed pipe tube to
be completly pulled out
NOTE
• If you have removed the refrigerator compartment door to pass the appliance
through an access door, lay the door down, but be careful not to damage the feed
water pipe tube.
Connection
wires
Upper hinge
Keeper
Lower hinge
①
②
Installation
9
