15
Installation
Height adjustment
- If the freezer is not leveled when the
refrigerator is installed, the refrigerator may
not be leveled.
When the freezer door is lower –
Level the door by turning the height
adjustment screw on the left. Use a (-)
driver or spanner to turn the screw’s
groove or nut in the counterclockwise
direction.
When the fridge door is lower –
Level the door by turning the height
adjustment screw on the right. Use a (-)
driver or spanner to turn the screw’s
groove or nut in the clockwise direction.
The refrigerator doors will close smoothly by heightening the front side by adjusting
the height adjusting screw. If the doors do not close correctly, performance may be
affected.
When the floor is
not leveled
When the fridge door is lower than the freezer door while using the
refrigerator, level the doors.
1. Use the
tool for adjustment on
the wide side to turn nut
( )
in the clockwise direction to loosen
the keeper nut.
2. Use the
tool for adjustment on
the narrow side to turn the
adjustment hinge pin
in
( )clockwise direction or
( ) counterclockwise direction
to adjust the height of the fridge
and freezer doors.
3. After aligning the height of the door, tighten the keeper nut in a counterclockwise
direction.
When the fridge
door is lower than
the freezer door
After leveling the
door height
Keeper nut
Adjustment
hinge pin
Tool for
adjustment
Up
Down
Height difference
Height difference
When using
the driver
When using
the spanner
Next
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Don't double up with other
appliances on the same outlet.
Do not forcefully level the height. The hinge pin may fall out.
(Adjustable range of height is a maximum of 2" (5 cm))
CAUTION
