w
w
The water tank lid and filling cap should be
cleaned periodically after being removed
from the water tank. A small brush such as a
toothbrush can be used to clean the grooved
Cleaning the Water Tank and filling lid
Cleaning
Be sure to unplug the power before cleaning
Before Cleaning
Clean the outside of the refrigerator with a soft
cloth soaked with warm water or mild dishwashing
detergent. If you use a detergent, be sure to wipe
it with a clean wet cloth.
Exterior
Same as above.
Interior
Wipe moisture from the dispenser area and on the
dispenser pad using a cloth.
Water Dispenser
Check that the power cord is not damaged, power
plug has not overheated, and that the power plug
is properly inserted into the outlet.
After Cleaning
Wipe moisture from around the door part and the
drip tray using a clean cloth.
Water Dispenser Drip Tray
w
w
Be sure to dry the appliance with a cloth after
wiping it with water.
Do not use abrasive, petroleum, benzene,
thinner, hydrochloride acid, boiling water, rough
brushes or scourers, etc, as they may damage
parts of the refrigerator.
WARNING
CAUTION
Care and Maintenance
21
or vacuuming any exterior surface or covers.
part of the filling cap.
the fill hole.
Ensure that the Water Tank lid is securely fitted
to the Water Tank before filling it through
1. Remove the Water Tank from the door (refer to
page 16). Lift up the release lever and release
2. The water tank can be washed when removed
from the refrigerator by using neutral cleansing
agents. Rinse thoroughly before refitting and
Separating the Water Tank lid from
the water tank.
refilling.
the 2 side clips on the Tank lid.
