LG GR-B404 Series, Руководство пользователя

Страница: 21 / 56

20
PRODUCT MANAGEMENT
Using the Smart Diagnosis
Function
Use this function if you need an accurate diagnosis
by an LG Electronics service centre when the product
malfunctions or fails. Use this function only to contact
the service representative, not during normal operation.
1
Close the product door.
2
Press the Child Lock button on the control panel
for 1 second to activate the lock.
x If the lock is already set, press the Child Lock
button and hold it to release the lock and then
press the
Child Lock button and hold it again to
reset.
x Please note that the smart diagnosis function will
not operate until 5 minutes have passed since
the locking was set.
3
Press and hold the Freezer Temperature button
for 3 seconds or longer.
x Only 3 °C will be lit on the control panel.
x The smart diagnosis function is automatically
terminated, and the operation is returned to its
original status 5 minutes after 3 °C is displayed
on the control panel when the door is closed.
4
Open the product door and place a phone on the
speaker hole in the upper right corner.
x Position the phone so that its microphone is
aligned with the speaker hole.
x The smart diagnosis sound is generated after
around 3 seconds.
x Do not take the phone off the speak hole while
the data is transmitted.
x
Hold the phone on the upper right speaker hole
and wait while the data is transmitted for smart
diagnosis.
x The data transfer sound may be harsh to the
ear while the smart diagnosis data is being
transmitted, but do not take the phone off the
speaker hole for accurate diagnosis until the data
transfer sound has stopped.
5
After the data transfer is complete, the service
agent will explain the result of the smart diagnosis.
x When the data transfer is complete, the transfer
completion message is displayed and the
control panel is automatically turned off and
then on again after a few seconds. After the
counsellor explains the diagnosis result, take the
recommended measures.
NOTE
x The smart diagnosis function depends on the local
call quality.
x The communication performance will improve and
you can receive better service if you use the home
phone.
x If the smart diagnosis data transfer is poor due
to poor call quality, you may not receive the best
smart diagnosis service.
21
Cleaning
Notes for Cleaning
Detach the shelves and drawers and clean them with
to time as they get dirty easily.
Regularly wipe the door packing with a wet soft towel.
If you use the door packing stained with the juice of
food or fruit, the packing on the product door can be
damaged quicker and the bottom part will become
particularly messier.
After cleaning, check if the power cable is damaged,
warm or improperly plugged.
Keep the air exhaust on the exterior of the product
clean.
damage.
Use a soft wet towel to wipe the product exterior. If you
used a neutral detergent, wipe it with a clean towel to
make sure it doesn’t stain.
Do not use a rough brush, or detergent (such as
liquid or polish) to remove adhesive marks or hand
prints.
This can cause discolouration of product exterior or
product damage.
Never clean the shelves or containers in the dishwasher.
The parts may become misshapen!
Detaching Top Shelf
1
Push the shelf cover up, slightly lift the ice maker,
ice bucket and freezer basket, and pull them out.
2
Slightly lift the front side of the shelf and pull it out.
shelf, remove it along with the shelf.
Detaching Freezer Basket
1
Hold the handle of the freezer basket and pull it
forward.
2
Lift the freezer basket slightly while pulling it to
remove it.