11
INSTALLATION
ENGLISH
1
Turn the levelling leg clockwise to raise that
side of the appliance or counterclockwise to
lower it.
2
Open the doors and check to make sure that
they close easily.
Turning on the Power
Earthing Instructions
It is recommended to install an earth wire to
prevent electric shock.
• Connect the earth wire
a
to the screw
b
on the
back of the appliance and the wall outlet
c
.
WARNING
• Do not connect the earth wire to gas pipe, water
pipe, water tap, telephone earth wire, and
lightining rod.
NOTE
• When you install the appliance in a humid or wet
location, you must install the earth wire. You are
obligated by law to install a circuit breaker in
addition to the earth wire. Make sure your
appliance is properly installed and earthed by a
qualified technician.
• Consult with your retailer or a qualified
technician before installing an earth wire. You
may be charged for the installation.
Connecting the Appliance
After installing the appliance, connect the power
plug into the outlet socket.
NOTE
• After connecting the power supply cord (or plug)
to the outlet, wait 3 or 4 hours before you put
food into the appliance. If you add food before
the appliance has cooled completely, your food
may spoil.
Moving the Appliance for
Relocation
Preparing for Relocation
1
Remove all food from inside the appliance.
2
Pull the power plug out, insert and fix it into the
power plug hook at the rear or on top of the
appliance.
3
Tape parts such as shelves and the door handle
to prevent from falling off while moving the
appliance.
4
Move the appliance with more than two people
carefully. When transporting the appliance
over a long distance, keep the appliance
upright.
5
After installing the appliance, connect the
power plug into a mains outlet socket and
switch it on.
global_main.book.book Page 11 Monday, August 23, 2021 11:02 AM