3. Remove the Grille by loosening 1 screw and pulling it
out.
4. Pull out the Shroud and remove the Fan Motor Assy by
loosening 2 screws.
5. Pull out the fan and, separate the Fan Motor, Brackets
and the Guide Fan.
3-5. DEF' CONTROL ASSY
Def control Assy consists of Defrost Thermostat and FUSE–M.
Defrost Thermostat functions to defrost automatically and it
is attached to metal side of the Evaporator and senses
Temp.
Fuse-M is a kind of safety device for preventing over-
heating of the Heater when defrosting.
At the temperature of 77°C, it stops the emission of heat
from the Heater.
1. Pull out the Shroud after removing the Grille.
2. Separate the connector connected with the Def Control
Assy and replace the Def Control Assy after cutting the
Tie Wrap and removing the Holder Fuse. (Figure 14)
3-6. LAMP
3-6-1. Freezer room lamp
1. Unplug the power cord from the outlet.
2. Remove the room lamp lid by taking down while pulling
it forward with your hand after inserting finger into the
inside hole as shown in (figure 16).
3. Remove the lamp by turning it counterclockwise.
4. Assemble in reverse order of disassembly. Replacement
bulb must be the same specication as original.
3-6-2. Refrigerator room lamp
1. Unplug the power cord from the outlet.
2. Remove refrigerator shelves.
3. Remove the room lamp lid by taking down while pulling
forward with your hands as shown in (figure 17).
4. Turn the lamp counterclockwise.
5. Assemble in reverse order of disassembly. Replacement
bulb must be the same specification as original.
- 7 -
GUIDE FAN
FAN
SHROUD
GRILLE
FAN MOTOR
Figure 12
CONTROL BOX-R
SHROUD-F
Figure 13
FAN
DEF CONTROL ASM
Figure 14
FREEZER ROOM LAMP
REFRIGERATOR ROOM LAMP
Figure 16
Figure 17
Содержание GR-532
Страница 18: ...P No 3828JD8475D APR 2003 Printed in Korea ...