25
HOW TO USE
1. Water
If you select “water” and press the trigger pad,
water is dispensed, and the water filling screen is
displayed.
When you remove the glass or cup from the
y
trigger pad, or if the trigger pad is held for
more than 3 minutes, the water dispensing
will stop and the display will then return to
the initial screen.
While “water” is selected, if you touch “water”
one more time, you can preset the amount of
water that is dispensed.
When the preset water selection option is
y
displayed, water will not be dispensed even
if the trigger pad is pressed.
Display window touch function
<water mode>
Directly touch the display window for operation.
When there is no touch screen activity, the
y
screen is turned OFF after 20 seconds.
Gently press only the corner quadrant of the
y
desired dispensing function.
If you press the dispenser trigger pad when
y
the screen is OFF, the previous extraction
mode will be performed. The display will
return back to the initial screen when the
trigger pad is released.
After touching the display window, select
y
the desired mode (water or cold water or
crushed ice or cubed ice), and press the
dispenser trigger pad.
NOTE
Whilst a preset water amount is being
dispensed, if you press “stop”, the water
dispensing stops, and the display will return
to the previous screen.
If the preset water dispensing is interrupted
by pressing stop, the preset amount will start
again when the dispenser is next operated.
when the preset amount is successfully
dispensed, the water dispensing will then
resume back to the normal on/off trigger pad
operation. If you press the dispenser trigger
lever again, it starts from the beginning for
the selected amount.
When you press
the lever
When you release
the trigger pad or
after 3 minutes of
continuos operation.
Touch “Water
extraction”
When 2 minute
water extraction is
completed
Touch “Stop”
a
b
d
c
a
If you select the “return arrow” icon, it returns
to the previous screen. (It is also applies to
other screens)
b
If you select “continuous”, it is switched to
the below screen, and when you press “water
out”, 2 minutes of water dispensing (about
3L) starts and the display will show the preset
time.
If you press the “stop” button during the water
dispensing, the water extraction stops and it
returns to the previous screen, and if the 2
minute water extraction is completed, it returns
to the initial screen.
