IMPORTANT SAFETY INFORMATION
3
WARNING
Keep ventilation openings, in the appliance enclosure or in the built-in
structure,
clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartment of the
appliance, unless they are of the type recommended by the manufacturer.
The refrigerant and insulation blowing gas used in the appliance require
special
disposal p
rocedures.
When disposal, please consult with services
agent or a
similarly qualified person.
In order to avoid the creation of a flammable gas air mixture if a leak in the
refrigerating circuit occurs, the size of the room in which the appliance
may be sited depends on the amount of refrigerant used. The room must be
2
1 m
in size for every 8g of R600a refrigerant inside the appliance. The amount
of refrigerant in your particular appliance is shown on the identification plate
inside the appliance. Never start up an appliance showing any signs of damage.
if in doubt, consult your dealer.
This appliance contains a small amount of isobutane refrigerant (R600a), but it is
also combustible. When transporting and installing the appliance, care should be
taken to ensure that no parts of the refrigerating circuit are damaged.
Refrigerant squirting out of the pipes could ignite or cause an eye injury.
If a leak is detected, avoid any naked flames or potential sources of ignition and
air the room in which the appliance is standing for several minutes.
