LG GN-332, Руководство по обслуживанию

Страница: 6 / 20

3-1 DOOR
●
Freezer Door
1. Remove the hinge cover by pulling it upwards.
2. Loosen hexagonal bolts fixing the upper hinge to the
body and lift the freezer door.
3. Pull out the door gasket to remove from the door foam
Ass'y.
●
Refrigerator Door
1. Loosen hexagonal bolts fixing the lower hinge to the
body to remove the refrigerator door only.
2. Pull out the door gasket to remove from the door foam
Ass'y.
3-2 DOOR SWITCH
1. To remove the door switch, pull out it with a '—' type
driver as shown in (figure 9).
2. Disconnect the lead wire from the switch.
3-3 THERMOSTAT
1. Remove the Cover Lamp-R by the use of '–––' type
driver inserting in the low holes of the cover.
2. Loose 2 screw.
3. Pull the Control Box-R.
4. Disconnect the Housing of lead wire.
5. Separate the INSU'Multi Duct and Control Box-R.
6. Dissasemble the Knob.
7. Separate the Thermostat and Control Box-R.
8. Separate the Thermostat and Resistor.
9. Disconnect the lead wire.
3-4 FAN AND FAN MOTOR
1. Remove the freezer shelf.
2. Separate the twist by pulling right.
3. Loosen 1 cap screw fixing the Grille Fan.
4. Loose 1 screw.
5. Pull out the Grille Fan and Shroud-F.
3. DISASSEMBLY
- 6 -
BOLT
HINGE
HINGE COVER
Figure 6
GASKET
Figure 7
LOWER HINGE
BOLT
Figure 8
Figure 9
INSU' MULTI DUCT
THERMOSTAT
CONT' BOX-R
COVER LAMP-R
RESISTOR
Figure 10
CAP
Figure 11