LG GMD916SBHZ, Руководство пользователя

Страница: 40 / 48

40 MAiNTENANCE
ENGLISH
Inside Walls (allow freezer to warm up
so the cloth will not stick)
To help remove odors, you can wash the inside
of the fridge with a mixture of baking soda and
warm water. Mix 2 tablespoons of baking soda to
1 litre of warm water. Be sure the baking soda is
completely dissolved so it does not scratch the
surfaces of the fridge.
Door Liners and Gaskets
Use a clean sponge or soft cloth and a mild
detergent in warm water. Do not use cleaning
waxes, concentrated detergents, bleaches, or
cleaners containing petroleum on plastic fridge
parts.
Plastic Parts (covers and panels)
Use a clean sponge or soft cloth and a mild
detergent in warm water. Do not use window
sprays, abrasive cleansers, or flammable fluids.
These can scratch or damage the material.
Condenser Coil Cover
Use a vacuum cleaner with an attachment to
clean the condenser cover and vents located
at the rear of the appliance. Do not remove the
panel covering the condenser coil area. Always
disconnect the main power before cleaning.
2
Installing a New Pure N Fresh filter.
Place the new filter inside of the cover with
the side that says “Front” facing outward.
Turn the filter cover to the right to reattach it
to the fridge wall.
After changing the filter, touch and hold the
Pure N Fresh filter button on the front display
for three seconds to reset the filter sensor.
Replacing the Pure N Fresh filter
It is recommended that you replace the Pure N
Fresh filter:
y
Approximately every 1~2 years.
y
When the Replace light turns on.
1
Remove the Old Filter
Turn the filter cover to the left to detach from
the fridge wall. The filter is located on the
inside of the filter cover. Remove the filter
from the cover and replace it with a new
filter.