5
LOCATION OF CUSTOMER CONTROLS
(1)
Digital Audio Ouput Connector
This is a digital audio output or Video CD output
connector.
You can connect this to a digital audio system or a
Video CD Board.
(2)
Analog Audio Output Connector
The Audio Output Connector connects to a sound
card.
(3)
Master/Slave/CSEL Jumper
These three jumpers are used to set the DVD-ROM
Drive to either a Master, Slave, or CSEL device.
(4)
Interface Connector
This 40-pin connector is used to transfer data and
control signals between the DVD-ROM Drive and your
PC.
(5)
Power-in Connector
Attach a power cable from the computer to this
connector.
R O M
R O M
R O M
R O M
COMPACT
1
2
4
3
5
6
1
2
5
4
3
FRONT VIEW
BACK VIEW
(1)
Headphone Jack
Standard
1
/
8
″
(3.5mm) stereo jack for listening to the
audio signal from audio CDs.
(2)
Headphone Volume Control
Adjusts the headphone sound level.
(3)
Disc Drawer
Accepts a CD-ROM/DVD-ROM disc on its tray.
(4)
Busy Indicator
The Busy Indicator lights during initialization and data-
read operations.
(5)
Emergency Eject Hole
Insert a paper clip here to eject the drawer manually or
when there is no power.
(6)
Open/Close/Stop Button
This button is pressed to open or close the CD tray.
If an audio CD is playing, pressing this button will stop
it, and pressing it
again will open the tray.
