background image

5

3. FEATURES & TECHNICAL EXPLANATION

3-1. FEATURES

̰

Direct Drive System

The advanced Brushless DC motor directly drives the drum 

without  belt and pulley.

̰

The Tilted Drum and Extra Large Door Opening

Tilted drum and extra large door opening make it possible 

to load and unload easily.

̰

Ultra Capacity

The larger drum enables not just higher head drop and stronger centrifugal

force, but also less tangling and wrinkling of the laundry. Heavier loads, such

as king size comforters, blankets, and curtains, can be washed.

̰

SEE-THROUGH DOOR AND BIG DOOR

You can see the laundry throughout the cycle.

Stainless steel drum offers extreme durability.

̰

STAINLESS STEEL DRUM

̰

Magnetic Door Plunger

Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will

promote air circulation and allow the interior of the machine to dry. To use this feature, after the

load has been removed, do not close the door completely. When the magnetic door plunger

comes into contact with the metal washer cabinet, it will secure the door slightly open allowing the

interior of the washer to dry.

̰

TUB CLEAN

Regular cleaning of the tub on a monthly basis using TUB CLEAN can help 

keep the tub clean and fresh.

Содержание GCWF1069CD1



















































Отзывы: