After assembling the door by aligning the hinge hole
bottom of the refrigerator door and the pin of the
hinge , connect properly to the hold of the upper left
included in the alternate bag. Tighten the bolt to screw
cover included in the alternate
bag. Take the right cap out of the alternate bag, then install
it on the right side of the refrigerator top.
Move the separated door handle to the right and fixate the
screw on the right position to attach the door cap .Move
the door cap on the right side to the left and attach it. Attach
the freezer door handle in the same method as the refrigerator
Loosen the bolt of the Hinge Middle , remove the Hinge
Middle , and lift up the freezer door to separate it.
Separate the hinge cover and set it on the separated
part of middle hinge . After unscrewing the screw connected
to the bottom cover connect the cover cap on the right side.
Loosen the bolt connected to the lower hinge . Unscrew
the screw fixating the door stopper at the
Note
Reversing the doors is not covered by the warranty.
1
3
2
38
2
30
21
25
26
21
20
21
24
5.
bottom of the freezer door ,and fixate it on the hole on
the left side with the door stopper .and then ,move
the upper cap to the right and cover it.
6.
Set the separate lower hinge and put it in the bag,take
out the lower left hinge of the bag and set the lower
left hinge on the bottom hole of the left side of the
freezer then tighten the bolt .After fixating the bottom
cover at the regular position,align the freezer door
on the pin of lower hinge to attach it properly.Turn over
the separated middle hinge and sheet hinge to assemble
them.Tighten the bolt ,than set the washer on the middle
hinge . (When tightening the bolt, be careful not to
cause an scratch on the cap decor on top of the freezer door).
8.
door handle .
1
32
27
28
31 43
32 44
30
33
31 43
28
45
45
45
27
25
30
20
23
21
9
24
20
21
22
23
21
45
27
20
25
30
37
36
7
6
9
38
33
26
25
30
31
32
43
44
27
28
9
21
37
36
38
7
6
7.
on the
middle
hinge
the screws to the left hinge
21
22
38
38
3
2
3
2
