DirectCD
TM
v2.5b(s)
4
Computer
Software
System Environment
This unit can be operated in the system environment explained
here.
❏
Occasionally the CD-R and CD-RW discs written by the CD-R/RW
drive cannot be read by other CD drives*. These unreadable discs
may need to be read using the CD-R/RW drive on which require
written.
* The disc written using the CD-R/RW drive might not be readable
by CD-ROMs other than Multi-read compatible (UDF compatible)
CD-ROMs.
Multiread compatible (UDF compatible) CD-ROMs are:
1. CD-ROMs that can read low reflectance.
2. CD-ROMs that support Packet Write.
Install the supplied CD Recording Software before using this unit.
233MHz (or faster) Pentium (for 16x speed,
350MHz or faster recommended)
Hard disk with average access time of 19 msec
or less, and data transfer speed of 2400KB/sec
or greater. 75MB or more free space.
(The free space needed for writing depends on
the quantity of data.)
Enhanced-IDE interface (as Primary Slave,
Secondary Master or Slave)
5.25-inch half-height bay required
+5V/+12V power socket required
Windows 95/98/2000/ME, Windows NT
Workstation Ver.4.0 or later
CD-R : Ricoh, Mitsubishi Chemical, Verbatim,
Taiyo Yuden, Fugi Film, Kodak, or Imation
discs are recommended.
CD-RW : Ricoh, Mitsubishi chemical, Verbatim,
Imation, Sony discs are recommended..
System
requirements
Hard disk
Interface
Drive bay
Power
Software Required OS
CD-R, CD-RW discs
CPU
Memory
Windows 95/98 : 64MB or greater.
Windows NT Workstation Ver. 4.0: 64MB or
greater (128MB or over recommended)
Windows 2000: 128MB or greater(256MB or
over recommended)
Windows ME: 64MB or greater
