6
OF
F
ON
POW
ER B
USY
PUS
H C
LOS
E
Installation
Hardware Installation
OF
F
ON
PO
WE
R B
USY
PUS
H C
LOS
E
To AC Wall
outlet.
Make sure you have a personal computer with
an available PC card slot before connecting the
drive to your personal computer.
Please refer to the device driver manual for the
method of setup, and the procedure of connection.
Connect the drive to the computer as shown in
figure to the left.
1. Power for all devices should be turned off
before attaching the cables.
Connect the PCMCIA interface cable into the
interface connector at the rear of the portable
CD-RW/DVD-ROM drive.
2. Insert the interface cable card into your
computer’s card slot firmly.
3. Connect the AC adapter plug to the DC IN
jack at the rear of the drive.
Attach the AC adapter to the AC outlet.
•
Discharge static electricity:
Static electricity could destroy this drive or components in a computer. Therefore, before
installing the drive, touch a metal object to discharge any static electricity that may have
charged your body or clothes. In addition, avoid wearing clothes that are likely to generate
static electricity, such as wool sweater.
•
Please do not turn off the drive, when the drive is recognized by the computer.
If you turn off the drive, Normal operation of a computer becomes impossible.
•
Please do not connect AC adapter and PC card cable by any means other than specified
above.
•
In order to prevent a top cover opening accidentally during operation, this drive has an
electric ejection mechanism. For this reason, when the power supply is off, even if someone
pushes an eject button, the top cover does not open. Moreover, there may be one second
or more of delay until the top cover opens, after pushing the eject button.
Connecting to computer
Notes
Notes
