LG GC-F399BVQA.CSWQECZ, Руководство пользователя

Страница: 29 / 30

Note
Reversing the doors is not covered by the warranty.
1
3 2
38
2
1
38
38
3
2
3
2
30
21
25 26
21
20
29
27
32
31
33
31
30
28
21
24
5.
Loosen the bolt of the Hinge Middle , remove the Hinge
Middle , and lift up the freezer door to separate it.
(When separating the refrigerator door, separate the bush
35
together.)Separate the hinge cover and set it on the separated
part of middle hinge . After unscrewing the screw connected
to the bottom cover connect the cover cap on the right side.
Loosen the pin in counterclockwise direction and move to the
hole on the left side to tighten in clockwise direction. Loosen
the bolt connected to the lower hinge . Unscrew the screw
fixating the door stopper at the bottom of the freezer door
, and fixate it on the hole on the left side with the door
stopper .And then, move the upper cap to the right and
cover it.
27
23 35
28
29
21 22
20
25
6.
Set the separate lower hinge on the bottom hole of the left
side of the freezer, and tighten the bolt . After fixating the
bottom cover at the regular position, align the freezer door
30
on the pin of lower hinge to attach it properly. Turn over
the separated middle hinge and sheet hinge to assemble
them. And set the bush and washer together to tighten
the bolt . (When tightening the bolt, be careful not to cause
an scratch on the cap decor on top of the freezer door).
8.
Move the separated door handle to the right and fixate the
screw on the right position to attach the door cap . Move
the door cap on the right side to the left and attach it. Attach
the freezer door handle in the same method as the refrigerator
door handle .
10
21
37
36
9
19
7
6
7.
After assembling the door by aligning the hinge hole on the
bottom of the refrigerator door and the pin of the middle
hinge , connect properly to the hold of the upper left hinge
included in the owner’s manual. After connecting the cable
, tighten the bolt to screw the screws to the left hinge
cover included in the owner’s manual. Move the hinge cover
attached on the left side to the right and attach it.
24
20
21
22
35
23
21
28
27
20
25
30
33
26
25
30
27
28 29
9
31
32
37
36
7
6
19
9
10
31