LG GC-B379SLQK, Руководство пользователя

Страница: 19 / 23

19
REHINGING OF DOORS
Unscrew the screw of the upper hinge
cover to remove the hinge cover and
disconnect the connection cable
(only for models with an external display).
Unscrew the bolts fixing the upper
hinge and carefully remove the door
from the middle hinge .
Remove the blank .
1.
1 1
2
4
3
5
8
1
2
3
5
4
A
8
For external
display
2.
5
7
Remove the upper door cover
(only for models with an external display),
pull out the cable and install it to the
hole on the opposite side of the door.
Install the upper door cover into place.
7
10
9
10
6
14
3. (Only for models with an external display).
Using a flat screwdriver, push and separate
the caps from the front panel
and unscrew the screws , remove the
panel , move the cable to the
opposite side. After installation of the
panel into place, tighten the screws
and close their heads with the caps .
13
12
8
11
15
12
11
11
11
12
13
13
CAUTION!
18
15
1. Prior to hinging the door to the opposite
side, first of all unload the refrigerator from
foodstuffs and remove all unsecured
accessories (shelves and drawers) from it.
2. To tighten and loose bolts, use a socket
wrench or a box wrench for 10 mm.
3. Do not lay the refrigerator onto the floor.
4. Take care to exclude dropping of the door
in the process of disassembly or assembly.
The refrigerator is designed so that the doors
can be opened right or left depending on the
layout of your kitchen.
Unscrew the bolts of the middle hinge,
remove the middle hinge and raise the door
of the freezing compartment to remove
the door. Remove the blank and install
it instead of the removed middle hinge .
4.
18
17
B
19
A
7
5
9
10
6
14
Remove the plastic bushing from the
door of the refrigeration compartment .
Unscrew the screw located above the
door of the refrigerator and move the door
stop to the opposite side. Tighten the
screw . Move the plastic bushings
and (only for models with an internal
display) to the opposite side.
6
А
REHINGING OF DOORS