background image

43

MAINTENANCE

EN

MAINTENANCE

WARNING

•  Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to 

follow this warning may result in serious injury, fire, electric shock, or death.

•  Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. 

They may damage the finish.

Cleaning After Every 

Wash

What to Clean

Always remove items from the washing 

machine as soon as the cycle is 

complete. Leaving damp items in the 

washing machine can cause wrinkling, 

colour transfer, and odour.
•  After the wash cycle is finished, wipe 

the door and door seal to remove any 

moisture.

•  Leave the door slightly open to dry the 

drum.

•  Wipe the appliance with a dry cloth to 

remove any moisture.

WARNING

•  Leave the door open to dry inside of 

the appliance only if the children are 

supervised at home.

Cleaning the Exterior

Proper care of your appliance can extend 

the service life.

Exterior

•  Immediately wipe off any spills.
•  Wipe with a damp cloth and then again 

with a dry cloth ensuring there is no 

moisture in cabinet joints or crevices.

•  Do not press on the surface or the 

display with sharp objects.

Door

•  Wash with a damp cloth on the outside 

and inside and then dry with a soft 

cloth.

WARNING

•  Do not attempt to separate any panels 

or disassemble the appliance. Do not 

apply any sharp objects to the control 

panel in order to operate the 

appliance.

Содержание FWV796 TSE Series





























































Отзывы: