LG FLATRON M3701C, Руководство по обслуживанию

Страница: 15 / 47

- 15 -
Copyright 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
System Control 2
System 4-SYS
OverScan 5%
RS-232 Host PC
Baud Rate 9600bps
RS-232 Select New
AGC-L 253 140
Audio Delay 0
BlkLine Detector
BlkLine Min. 10
BlkLine Max 70
BlkLine Gap. 20
Full Time 8
Original Time 2
Panel Control
AV / PC AV
ISM Auto
Gamma 0
Pwr. Save 75%
Bright 63%
Pnl.Lock Lock
OrbitPixel 2
Orbit Step 2
OrbitTime 120 Sec.
Inv.Time 30 Min
GUC 0
AMSE 0
Module Download 0
Reset Panel Used Time
The OSD is displayed when 'OK' Key is pressed on BlkLine
Detector in Service Menu.
BlkLine Detector
- BlkLine Min : Sets the BlkLine Min
- BlkLine Max : Sets the BlkLine Max
- Full Time : Sets the Full time
- Original Time : Sets the Original time
The OSD is displayed when 'OK' Key is pressed on System
Control 2 in Service Menu.
System Control 2
- System : Sets the Color system mode
- OverScan : Sets the Video Signal OverScan
- RS-232 Host : Nothing
- Baud Rate : Sets the RS-232 communication speed
- RS-232 Select : Select the RS-232 communication
- AGC-L : Nothing
- Audio Delay : Sets the Audio Delay(ms)
The OSD is displayed when 'OK' Key is pressed on Panel
Control in Service Menu.
Panel Control
- AV / PC : Nothing
- ISM : Nothing
- Gamma : Nothing
- Pwr.Save : Nothing
- Bright : Nothing
- Pnl.Lock : Nothing
- OrbitPixel : Sets the Pixel
- Orbit Step : Sets the Step
- Orbit Time : Sets the Time
- Inv.Time : Sets the inversion time
- GUC : Nothing
- AMSE : Nothing
- Module Download : Nothing
- Reset Panel Used Time : Reset the Panel Use Time