A7
<Table of PIP/POP/PBP Function Support>
SWAP
SWAP
When 'Input Signal 1' comes on in the main screen, only 'Input Signal 2' can be displayed on the sub-screen. On
the contrary, if the main screen displays 'Input Signal 2', the sub-screen can display 'Input Signal 1' only. You can
swap 'Input Signal 1' and 'Input Signal 2' using the SWAP button.
1. Take out the battery cap.
2. Insert the battery with correct polarity (+/-).
3. Close the battery cap.
• You can use a remote controller 7 meter distance and 30 degree (left/right)
within the receiving unit scope.
• Dispose of used batteries in the recycle bin to prevent environmental pollution.
Inserting batteries into remote controller.
CVBS
CVBS
S-VHS
S-VHS
SCART 1
COMPONENT 1
SCART 1
COMPONENT 1
SCART 2
COMPONENT 2
SCART 2
COMPONENT 2
3.
Swap Button
You can swap the main screen and the sub-screen when the PIP/POP/PBP function is used..
PIP
POP
PBP
Using the Remote Control
