manualshive.com logo in svg

LG FLATRON L1530S, Руководство по обслуживанию

Поделиться
Скачать
LG FLATRON L1530S Скачать руководство пользователя страница 9

DESCRIPTION OF BLOCK DIAGRAM

- 8 -

1. Video Controller Part.

This part amplifies the level of video signal for the digital conversion and converts from the analog video signal to the
digital video signal using a pixel clock.
The pixel clock for each mode is generated by the PLL.
The range of the pixel clock is from 25MHz to 135MHz.
This part consists of the Scaler, ADC, LVDS transmitter.
The Scaler gets the video signal converted analog to digital, interpolates input to 1280 X 768 resolution signal and
outputs 8-bit R, G, B signal to transmitter.

2. Power Part.

This part consists of the one 3.3V regulator, and two 2.5V drop diodes to convert power which is provided 12V, 5V in
Power board.
5V is provided for LCD panel and Micom.
Also, 5V is converted 3.3V by  regulator and 3.3V is converted 2.5V by drop diode. 
Converted power is provided for IC in the main board.

3. MICOM Part.

This part consists of EEPROM IC which stores control data, Reset IC and the Micom.
The Micom distinguishes polarity and frequency of the H/V sync are supplied from signal cable.
The controlled data of each modes is stored in EEPROM.

Содержание FLATRON L1530S


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды