LG FLATRON 915 FT PLUS, Руководство по обслуживанию

Страница: 8 / 23

(a)
(b)
P201
P202
5. VIDEO PCB ASSEMBLY REMOVAL
1) Disconnect P201, P202 and Pin (a) from the
Video PCB.
2) Remove screw (b).
3) Remove the Video PCB Assembly from the
interface Assembly.
(a)
(a)
(a)
(b)
(b)
(a)
(a)
P733
P932
P101-P207
P931
6. INTERFACE & CONTROL PCB ASSEMBLY
REMOVAL
1) Remove five screws (a).
2) Carefully remove the interface Assembly from
the Main PCB Board.
3) Disconnect P101-P207.
4) Remove two screws (b).
5) Remove the control PCB Assembly.
4. TOTAL CHASSIS ASSEMBLY REMOVAL
1) Disconnect P903, P904 (Degaussing pin),
P704 (DY pin), P613 (Tilt pin), P610and
P611, P612 (Purity pin) from the Main PCB.
2) Disconnect P306 (GND Wire) from the
Video PCB.
3) Carefully separate the CDT Board
Assembly from the CDT neck.
4) Discharge the remaining static
electricity by shorting between
the Anode Cap and the CDT ground.
5) Disconnect the Anode Cap
from the CDT.
6) Remove three screws (a).
7) Remove two screws (b).
8) Remove the Total Chassis Assembly
from the Cabinet.