LG FA166 Скачать руководство пользователя страница 19

Страница: 19 / 65

3-2

Are the speaker cables connected correctly

between the speaker terminals on the unit

and the speakers?

Make sure to connect the cables to each specified

connector tightly on the unit.

Connect the woofer cables to the WOOF SYSTEM

connectors on the rear panel.

YES

Does the customer select correctly

the input function he or she wants to listen to?

Make sure to connect some cables like A/V cables

and FM/AM antenna cables.

YES

After pressing FUNCTION,

is “CD, USB, Portable, IPOD, AM or FM” displayed?

Make sure to select the desired input function

pressing FUCTION button.

YES

Turn the master volume clockwise

for the volume up.

The volume level LEDs around the master volume

will be turned on more and more

while turning it clockwise for the volume up.

YES

Is there any sound from the selected input source?

(Portable, USB, TUNER or CD Disc)

Refer to a device’s instruction manual

and then check if there is sound output from it

connecting another audio system.

YES

Are the sound spectrum level LEDs

on the left and right side of the front panel

being changed up and down

according to the sound input gain?

The sound spectrum level LEDs will be turned on/off

repeatedly at regular intervals. The speakers cables

might be short-circuited with the chassis ground.

Be careful not to be shorted each other.

YES

The sound is output from the speakers.

YES

Sound OK

1. NO SOUND FROM SPEAKERS

TRAINING MASTER

Содержание FA166


































































Результаты поиска

Содержание FA166

Отзывы:

Бренды по названию

Популярные бренды

LG FA166, Руководство по обслуживанию

Результаты поиска

Содержание FA166

Отзывы:

Бренды по названию

Популярные бренды