19
INSTALLATION
ENGLISH
Unpacking the Appliance
Lifting the Appliance Off the
Foam Base
After removing the carton and shipping
material, lift the appliance off the foam
base.
• Make sure the tub support
A
* comes
off with the base and is not stuck to the
bottom of the appliance.
• If you must lay the appliance down to
remove the carton base
B
, always
protect the side of the appliance and
lay it carefully on its side. Do not lay the
appliance on its front or back.
* This feature may vary depending on
the model purchased.
Removing the Transit Bolt
Assemblies
To prevent the appliance from severe
vibration and breakage, remove transit
bolts and retainers.
1
Starting with the bottom two transit
bolts
A
, use the spanner (included) to
fully loosen all transit bolts by turning
them counterclockwise.
2
Remove the bolt assemblies by
wiggling them slightly while pulling
them out.
3
Install the hole caps.
global_main.book.book Page 19 Sunday, October 16, 2022 2:53 PM