14
EN
Using Anti-Slip Sheets
(Optional)
If you install the appliance on a slippery
surface, it may move because of excessive
vibration. Incorrect leveling may cause
malfunction through noise and vibration. If this
occurs, install the anti-slip sheets under the
leveling feet and adjust the level.
1
Clean the floor to attach the anti-slip sheets.
•
Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains,
the anti-slip sheets may slip.
2
Adjust the level after placing the appliance
in the installation area.
3
Place the adhesive side of the anti-slip
sheets on the floor.
This side up
Adhesive side
4
Ensure the appliance is level.
•
Push or rock the top edges of the
appliance gently to make sure that the
appliance does not rock. If the appliance
rocks, level the appliance again.
NOTE
•
You can obtain anti-slip sheets from the LG
Service Centre.
Wooden Floors (Suspended
Floors)
•
Wooden floors are particularly susceptible to
vibration.
•
To prevent vibration we recommend you place
rubber cups at least 15 mm thick of the each
foot of the appliance, secured to at least two
floor beams with screws.
Rubber Cup
•
If possible install the appliance in one of the
corners of the room, where the floor is more
stable.
•
Fit the rubber cups to reduce vibration.
NOTE
•
Proper placement and leveling of the washing
machine will ensure long, regular, and reliable
operation.
•
The washing machine must be 100%
horizontal and stand firmly in position.
•
It must not ‘Seesaw’ across corners under the
load.
•
The installation surface must be clean, free
from floor wax and other lubricant coatings.
•
Do not let the feet of the washing machine get
wet. Failure to do so may cause vibration or
noise.
•
You can obtain rubber cups
(p/no.4620ER4002B) from the LG Service
Centre.
