13
EN
3
Install the hole caps.
•
Locate the hole caps
b
included in the
accessory pack or attached on the back.
Levelling the Appliance
Checking the Level
When installing the appliance, the appliance should
be aligned and perfectly level.
•
If the appliance is not aligned and level properly,
the appliance may be damaged or may not
operate properly.
Adjusting and Levelling the Feet
When installing the appliance, the appliance should
be aligned and perfectly level. If the appliance is not
aligned and level properly, the appliance may be
damaged or may not operate properly.
1
Turn the adjustable feet as required if the floor
is uneven.
•
Do not insert pieces of wood etc. under the
feet.
•
Make sure that all four feet should be stable
and resting on the floor.
2
Check if the appliance is perfectly level using a
spirit level
a
.
3
Secure the adjusting feet with the lock nuts
b
by turning counterclockwise against the bottom
of the appliance.
4
Check if all lock nuts at the bottom of the
appliance are secured properly.
NOTE
•
Proper placement and levelling of the appliance
will ensure long, regular, and reliable operation.
•
The appliance must be horizontal and stand
firmly in position.
•
It must not ‘Seesaw’ across corners under the
load.
•
Do not let the feet of the appliance get wet.
Failure to do so may cause vibration or noise.
Using Anti-Slip Sheets
This feature is only available on some models.
If you install the appliance on a slippery surface, it
may move because of excessive vibration. Incorrect
levelling may cause malfunction through noise and
vibration. If this occurs, install the anti-slip sheets
under the levelling feet and adjust the level.
1
Clean the floor to attach the anti-slip sheets.
•
Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains,
the anti-slip sheets may slip.
