background image

4

arnings

W

For your safety, the information in this manual must be followed to minimize the risk
of fire or explosion, electric shock, or to prevent property damage, personal injury, or
loss of life.                   

READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE 

WARNING!

• Before installation, check exterior damages. 

If it has, do not install. 

• Do not install or store the washer where it will 

be exposed to the weather.

• Do not tamper with controls.
• Do not repair or replace any part of the washer 

or attempt any servicing unless specifically
recommended in the user-maintenance instructions or
published user-repair instructions that you understand
and have the skills to carry out.

• Keep the area underneath and around your appliances

free of combustible materials such as lint, paper, rags,
chemicals, etc.

• The appliance is not intended for use by young children

or infirm persons without supervision. Do not allow
children to play on, with, or inside this or any other
appliance.

• Keep small animals away from the appliance. 
• Do not leave the washer door open.

An open door could entice children to hang on the door
or crawl inside the washer.

• Never reach into washer while it is moving. Wait until

the drum has completely stopped.

• The laundry process can reduce the flame retardant of

fabrics. To avoid such a result, carefully follow the
garment manufacturer’s wash and care instructions.

• Do not wash or dry articles that have been cleaned in,

washed in, soaked in, or spotted with combustible or
explosive substances (such as wax, oil, paint, gasoline,
degreasers, dry-cleaning solvents, kerosene, etc.)
which may ignite or explode. Oil may remain in the tub
after a whole cycle resulting in fire during drying. 
So, do not load oiled clothes.

• Do not slam the washer door closed or try to force the

door open when locked. This could result in damage to
the washer.

• When the machine runs high temperature, the front

door may be very hot. Don’t touch it. 

• To minimize the possibility of electric shock, unplug this

appliance from the power supply or disconnect the
washer at the household distribution panel by removing
the fuse or switching off the circuit breaker before
attempting any maintenance or cleaning.

• When unplugging power cord, do not pull out by

grasping the cord. Otherwise, the power cord may be
damaged. 

• Never attempt to operate this appliance if it is

damaged, malfunctioning, partially disassembled, or
has missing or broken parts, including a damaged cord
or plug.

• Before discarding an old machine unplug it. Render the

plug useless. Cut off the cable directly behind the
appliance to prevent misuse. 

• When a product was under water, Please call service

center. There is a  risk of electric shock and fire.

• Appliance connected to the water mains using new

hose-sets. Old hose-sets should not be reused.

• To reduce the risk of personal injury, adhere to all

industry recommended safety procedures including the
use of long sleeved gloves and safety glasses. Failure
to follow all of the safety warnings in this manual could
result in property, personal injury or death.

• Do not push down the door excessively, when washer

door open. This could topple over the washer.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path
of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
• Do not use an adapter this will defeat the grounding plug.
• If you don’t have the proper outlet, consult an electrician.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

:

To reduce the risk of fire, electric shock, or injury to persons when using

the washer, follow basic precautions, including the following:

SAVE THESE INSTRUCTIONS        

WARNING

:

I

mproper  connection  of  the  equipment-grounding  conductor  can  result  in  electric  shock.  Check  with  a

qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the
plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

Содержание F1443KD2





































Отзывы: